The 9 Things Your Parents Taught You About Suzuki Ignis Key

How to Unstick a Suzuki Ignis Key

suzuki spare key's fanciful, inexpensive city car receives a midlife refresh. It's not a supercar, but it eats up the tarmac in rural and urban areas with ease, and its nifty turning circle makes town-centre driving effortless.

The new model also comes loaded with intelligent driver assistance and safety features such as lane departure warning and a sleepiness alarm, which are both welcome additions on long drives.

Steering Lock

The steering lock is a security measure that prevents your Ignis from being stolen while in gear. It's an important security measure, but it can be a pain when you have to go to a location and you are unable to unlock the wheel. Fortunately, there are easy solutions to fix the issue.

In the beginning, check if the ignition switch is in the "on" position. If this is the case, then try turning the key in the same direction as you did prior to the time that the wheel became locked. It can be tricky but usually enough to unlock the wheel.

If the wheel does not unlock after spraying canned air in the ignition cylinder, you can grease the cylinder. Be sure to wear eye protection before doing this to ensure that you do not get any canned air in your eyes! Liquid graphite is also a good option to provide lubrication to the cylinder.

If none of these works then you'll need to replace the ignition assembly. This component is easy to find in any auto parts shop. Make sure you purchase an exact replacement and then compare it with your old one. Remove the cover on the ignition to see the part.

Worn

The steering lock could cause the ignition switch to be stuck. This safety feature is designed to stop your Ignis from moving when the engine is running. If this happens, you can unbind the steering wheel by manipulating it.

Over time, the Ignis keys can wear out and become difficult to turn. It may not happen as often as a bad switch, but it does occur. If this is the case, you must replace your key.

Find out if anything hinders your Ignis ignition key from entering the cylinder. There may be dirt or debris which can become stuck inside the ignition cylinder and prevent it from turning.

In the end, you can try a little grease to see if it helps. You can find a variety of lubricants at your garage or at a local auto parts store.

Another alternative is to use an silicon "glow in the dark" key cover. These covers absorb light and then release it when the conditions are murky or darker. These covers will also protect your keys from wear and tear. They are available for most suzuki car key models, and can be purchased online or from a nearby Suzuki dealership.

Bent

A key can become bent over time. The teeth of the keys may not connect to lock cylinders in the same manner. This could stop the key from turning. If this happens the key needs to be replaced. It is a good plan to duplicate the spare key and store it in a safe place.

The cylinder for ignition can wear out. The lock pins in the internal lock could become caught together, which prevents the key from being able to go completely into or out of the cylinder. The replacement of the cylinder may solve this issue, however it is best to do it before the key gets stuck in the ignition to avoid further damage.

If your keys from Ignis are stuck even after trying the most basic solutions It's probably time to grease the cylinder. Graphite powder or liquid graphite could aid in moving the lock pins more freely, and also free your key. You can purchase this in most auto parts stores. When applying the lubricant make sure your Ignis is in park. Don't attempt to manipulate it to loosen it. This could lead to more serious problems.

Broken

If you've tried everything else to remove a lock but it's still stuck the key, your final option is to try a lubricant. You can purchase this at your local auto parts store and apply it to the inside of the cylinder that controls the ignition with a cotton ball or a rag. Try again. Move the key forwards and backwards gently to spread the oil. You can try rubbing it forward, but be careful not to push too hard because you could break it in the cylinder.

The circuitry inside the key may also become unresponsive due to age and usage. This isn't as common and usually means you'll want to have the key duplicated for another one.

Lastly, the case of the case of your suzuki ignis key key fob could be damaged or worn out. This is particularly true in the case of a low-cost replica key fob with a plastic or rubber shell. Depending on the situation The Key Crew can sometimes migrate the internal circuitry of your old key fob into a replacement shell case, avoiding the need to purchase a new key fob. We'll inform you whether this is an option for your situation when we call you to schedule the service.